Fortinet FAP-221E Access Point Wireless Price in Qatar
Fortinet FAP-221E Indoor Wireless AP — 1x GE RJ45 port, 802.11 a/b/g/n/ac Wave 2, dual radio (2.4 GHz/5 GHz), 2×2 MU-MIMO, ceiling/wall mount kit included, power adapter not included
Product Description
FAP-221E Specification |
|
Hardware |
|
Hardware Type | Indoor AP |
Number of Radios | 2 + 1 BT/BLE |
Number of Antennas | 4 Internal + 1 Internal BT/BLE |
Antenna Type and Peak Gain | PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
Frequency Bands (GHz)* | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725,5.725–5.850 |
Radio 1 Capabilities | 2.4 GHz b/g/n (2×2:2 stream)
20/40 MHz (256 QAM) |
Radio 2 Capabilities | 5 GHz a/n/ac (2×2:2 stream)
20/40/80 MHz (256 QAM) |
Maximum Data Rate | Radio 1: up to 400 Mbps
Radio 2: up to 867 Mbps |
Bluetooth Low Energy (BT/BLE) Radio | Bluetooth scanning and iBeacon advertisement @ 4 dBm max TX power |
Interfaces | 1x 10/100/1000 Base-T RJ45 |
Power over Ethernet (PoE) | IEEE 802.3af |
Simultaneous SSIDs | 16 (14 if background scanning enabled) |
EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication | WPA™ and WPA2™ with 802.1x or Preshared key, WEP,Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power | 2.4 GHz: 23 dBm / 200 mW (2 chains combined)*
5 GHz: 24 dBm / 251 mW (2 chains combined)* |
Kensington Lock | Yes |
IEEE Standards | 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X,802.3af, 802.3az |
SSID Types Supported | Local-Bridge, Tunnel, Mesh |
Per Radio Client Capacity | Up to 512 |
Cellular Co-existence | Yes |
LED Off Mode | Yes |
Advanced 802.11 Features |
|
802.11ac MU-MIMO Wave 2 | Yes |
Transmit Beam Forming (TxBF) | Yes |
Low-Density Parity Check (LDPC) Encoding | Yes |
Maximum Likelihood Demodulation (MLD) | Yes |
Maximum Ratio Combining (MRC) | Yes |
A-MPDU and A-MSDU Packet Aggregation | Yes |
MIMO Power Save | Yes |
Short Guard Interval | Yes |
Wireless Monitoring Capabilities |
|
Rogue Scan Radio Modes | Background, Full-time |
WIPS / WIDS Radio Modes | Background, Full-time |
Packet Sniffer Mode | Yes |
Spectrum Analyzer | Yes |
Dimensions |
|
Length x Width x Height | 6.3 x 6.3 x 1.85 inches(160 x 160 x 47 mm) |
Mounting Options | Ceiling, T-Rail, and Wall |
Included Accessories | Mount kits for Ceiling, T-Rail, and Wall |
Environment |
|
Power Supply | SP-FAP200-PA-XX, GPI-115,or GPI-130 |
Power Consumption (Max.) | 12.36 W |
Humidity | 5–90% non-condensing |
Operating / Storage Temperature | -4–113°F (-20–45°C) /-40–158°F (-40–70°C) |
Directives | Low Voltage Directive • RoHS |
UL2043 Plenum Material | Yes |
Mean Time Between Failures | >30 Years |
IP Rating | \ |
Surge Protection Built In | \ |
Hit-less PoE Failover | No |
Certifications |
|
Wi-Fi Alliance Certified | Yes |
DFS | FCC, IC, CE, Japan, Taiwan |
Warranty |
|
Limited Lifetime Warranty | Yes |
* Frequency selection and power may be restricted to abide by regional regulatory compliance laws. |
Reviews
There are no reviews yet.