Fluke Networks MultiFiber Pro Optical Power Meter and Fiber Test Kits Price in Qatar

First MPO fiber tester to support both Singlemode and Multimode MPO fiber certification

Automatic scanning and testing of all fibers in MPO connectors with “Scan All”
Support for both Multimode and Singlemode MPO fiber trunks
Eliminates the need for fan-out cords when testing MPO fiber trunks
Easy to interpret test results with minimal navigation
The user interface displays all 12 fibers
Automatic 8, 10 and 12 fiber measurements
Troubleshoot MPO fiber links and drill down to single fiber test results
Mag Kit Strap Attachment – Strong rare earth magnet attaches to metal surfaces in the testing environment, allowing the technician to work “hands free”

SKU: Fluke-MultiFiber-Pro Category: Fiber Certification Tester

Product Description

Optical Power Meter (Specifications apply at 23ºC (73ºF), unless otherwise noted.)
Detector type	InGaAs
Calibrated wavelengths	850 nm, 1300 nm, 1310 nm, 1550 nm
Measurement range	0 dBm to -50 dBm
Test time	6 seconds
Power measurement linearity	±0.1 dB2
Power measurement uncertainty	±0.35 dB2
Power measurement repeatability	< 0.10 dB2
Display resolution, dB or dBm	0.01
Power display units	dBm, mW, µW
User-selectable limit for loss	0.05 dB to 50.0 dB, in increments of 0.05 dB up to 10.0 dB and 0.1 dB up to 50.0dB
Auto wavelength detection	Yes
Polarity detection	Detects A, B, C, and Corning Plug & Play™ Universal Systems polarities
2 kHz detection	Yes
Record storage	3000 records, one fiber per record (250 12-fiber cables)
External interface	USB 2.0, full speed
Optical connector	MPO interface for 12-fiber, unpinned plugs. Compatible with 62.5 µm, 50 µm, and singlemode fibers. Connector has a self-closing, protective cover.
Power requirement	2 AA alkaline batteries
Battery life3	30 hours (typical)
Automatic power-off	10, 20, 30, or 60 minutes (can be disabled by the user)
Low battery warning	Low battery icon blinks
Size	5.8 in x 3.2 in x 1.6 in (14.7 cm x 8.0 cm x 4.0 cm)
Weight	10.9 oz (309 g)

For 850 nm, 0 dBm to -50 dBm. For 1300, 1310, 1550 nm, -5 dBm to -50 dBm
For a continuous-wave optical signal.
Measured power levels≤ 0 dBm. Backlight on. Battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.
23°C, after 10 minutes of warm-up time.
23°C, after 15 minutes of warm-up time.
Auto wavelength, SCAN ALL, and backlight on. Battery life depends on the condition and type of batteries used. Fluke Networks recommends alkaline batteries.

Sources

	850 nm Source	1310 nm Source	1550 nm Source
Emitter type	LED	Laser
Wavelength	±30 nm	1310 nm ±20 nm	1550 nm ±20 nm
Spectral width (FWHM)	50 nm (typical)	2 nm typical, 5 nm maximum
Minimum output power	≥ -24 dBm	≥ -1 dBm
Power output stability	≤±0.1 dB over 8 hours4	±0.25 dB over 8 hours5
Laser safety	IEC 60825-1:Class 1
Encircled flux	Meets TIA 455-526-14B, ISO/IEC 14763-3, and IEC 61280-4-1 for 50/125 µm at the source’s optical connector.	NA
Optical connector	MTP/MPO interface for 12-fiber, unpinned plugs. Compatible with 62.5 µm and 50 µm fibers, non-APC only. Connector has a self-closing, protective cover.	MTP/MPO interface for 12-fiber, unpinned plugs. Compatible with 9 µm fibers, APC only. Connector has a self-closing, protective cover.
4. 23°C, after 10 minutes of warm-up time. 5. 23°C, after 15 minutes of warm-up time
Modes	2 kHz modulated, auto wavelength/td>
Power requirement	2 AA alkaline batteries
Battery life6	>30 hours (typical)
Automatic power-off	10, 20, 30, or 60 minutes (can be disabled by the user)
Low battery warning	Low battery icon blinks
Size	5.8 in x 3.2 in x 1.6 in (14.7 cm x 8.0 cm x 4.0 cm)
Weight	11.4 oz (323 g)

There are no reviews yet.

Be the first to review “Fluke Networks MultiFiber Pro Optical Power Meter and Fiber Test Kits Price in Qatar”