- Your cart is empty
- Continue Shopping
Fluke Networks MicroScanner Cable Verifier Price in Qatar
Fluke Networks MicroScanner Cable Verifier Price in Qatar
- Straightforward Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
- Multimedia Support – Tests all common media types including RJ11, RJ45, Coax(MS2 only), with no need for adapters
- IntelliTone Toning – Trace virtually any cable or wire pair with IntelliTone digital and analog toning
- VDV Service Detection – Verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
- Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or a dark closet
- Magnetic Strap (included in MicroScanner kits) – Allows technicians to keep their hands free and their tester safe from potential drops and accidents with strong rare earth magnet
Product Description
Specifications
MicroScanner2 and MicroScanner PoE Specifications
Specifications apply at 23 °C (73 °F), unless otherwise noted.
| Environmental Specifications | |
| Operating temperature | 32 °F to 113 °F (0 °C to 45 °C) |
| Storage temperature | -4 °F to +140 °F (-20 °C to +60 °C) |
| Operating relative humidity (% RH without condensation) | 90 % (50 °F to 95 °F 10 °C to 35 °C) 75 % (95 °F to 113 °F 35 °C to 45 °C) |
| Shock and Vibration | Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop test with and without wiremap adapter attached |
| Safety | IEC 61010-1 3rd Edition |
| Altitude | 4,000 m; Storage: 12,000 m |
| EMC | IEC 61326-1 |
| General Specifications | |
| Test connectors | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner2: F-connector for coaxial cable. |
| Power | Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life: 20 hours of typical use Other compatible battery types: 2 AA photo lithium, NIMH, NICAD |
| Dimensions and weight (with batteries installed and wiremap adapter attached) | 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm) MicroScanner2: 10.6 oz (300 g) MicroScanner PoE: 10.6 oz (300 g) |
| Display | Monochrome LCD with backlight |
| Test Modes | |
| Cable test | Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen. |
| Tone | Generates Intellitone™ and normal analog toning signals |
| PoE | MicroScanner2: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices MicroScanner PoE: Solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices |
| Performance Specifications | |
| Cable types tested | Twisted pair: UTP, FTP, SSTP Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω |
| Length test | Range: 460 m (1500 ft) Resolution: 0.3 m (1 ft) Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error. Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable. |
| Wiremap test | Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults. |
| Ethernet port detection | MicroScanner2: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps. MicroScanner PoE: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps. |
| Tone generator | Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe. |
Streamlined verification testing
The MicroScannerTM Cable Verifier series simplifies the testing of voice, data, and video cable. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What’s more, it supports virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever.
Rule out service problems fast
Today’s communications technicians have a lot more problems to deal with than just the cabling. They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem. The MicroScanner Cable Verifier series is equipped to answer the question to reduce time troubleshooting. Is there telephone voltage? What’s the polarity? Is there an Ethernet switch at the far end? Is PoE available? If PoE is available, is it enough to run my device? The MicroScanner Series acknowledges this, giving technicians the vision to verify today’s most common voice, data, and video services. That means faster, more comprehensive troubleshooting.”
| Comparison Chart | ||
| MicroScanner2 | MicroScanner PoE | |
| Twisted Pair (RJ-11, RJ-45) | ||
| Wiremap | ✓ | ✓ |
| Length / Distance to Fault | ✓ | ✓ |
| Coaxial | ||
| Length / Distance to Fault | ✓ | |
| Service Identification | ||
| Reports Maximum Power Class | ✓ | |
| 10/100/1000BASE-T | ✓ | ✓ |
| 2.5GBASE-T, 5GBASE-T, 10GBASE-T | ✓ | |
| Power Over Ethernet | 802.3af | 802.3af, 802.3at, 802.3bt |
| Analog and Digital Toning | ✓ | ✓ |
| Optional Remote Identifiers | ✓ | ✓ |
Models
| Model Number/Name | Description |
| MS-POE | Microscanner PoE with carrying case |
| MS2-100 | MicroScanner2 Cable Verifier. Includes MicroScanner2 Cable Verifier with main wiremap adapter, multi-language Getting Started Guide, batteries, and Fluke Networks carry pouch |
Kits
| Model Number/Name | Description |
| MS2-TTK | MicroScanner2 Termination Test Kit includes: MicroScanner2 Cable Verifier, IS60 Pro-Tool Kit, IntelliToneTM 200 Probe, RJ11 and RJ 45 patch cables, lanyard, quick start guide, magnetic strap attachment, and 9 volt battery, packaged in a deluxe Fluke Networks carry case. |
| MS2-KIT | MicroScanner2 Professional Kit includes: MicroScanner2 Cable Verifier with main wiremap adapter, remote identifiers #2-7, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter, F Coax push on patch cord, accessory soft pouch, (2) AA alkaline batteries, (1) 9V alkaline battery, MicroScanner2 Getting Started Guide, Magnetic Strap Attachment, IntelliTone Pro Getting Started Guide, packaged in a deluxe Fluke Networks carry case |
| MS-POE-KIT | Microscanner PoE Professional Kit with Intellitone Pro 200 Probe and Remote ID kit. |
| MS2-FTK | Copper and Fiber Basic Technician’s Kit – Includes the MicroScanner (MS2-100) and SimpliFiber Pro (FTK1000) Fiber Test Kit. |
Reviews
There are no reviews yet.