Cisco C9117AXI-I Catalyst 9120 WiFi 6 Access Point – Price in Qatar

The Cisco® Catalyst® 9117 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent.Wi-Fi 6; 8×8:8 MIMO, I Domain.

SKU: C9117AXI-I Category: Cisco Wireless

Product Description

C9117AXI-I Specification
Description	Cisco Catalyst 9117AX Series, I Domain
Software	•Cisco Unified Wireless Network Software Release 8.9 or later •Cisco IOS ® XE Software Release 16.11or later
Supported wireless LAN controllers	•Cisco Catalyst 9800 Series Wireless Controllers •Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities	•8×8 MIMO with four spatial streams for 5-GHz band •4×4 MIMO with four spatial streams for 2.4-GHz band •Maximal Ratio Combining (MRC) •20- and 40-MHz channels • PHY data rates up to 600 Mbps (40 MHz with 5 GHz) •Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) •Cyclic Shift Diversity (CSD) support
802.11ac	•8×8 downlink MU-MIMO with eight spatial streams •MRC •802.11ac beamforming •20-, 40-, 80-, and 160-MHz channels • PHY data rates up to 3.5 Gbps at 5 GHz •Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) •CSD support
802.11ax	•8×8 MIMO with eight spatial streams for 5-GHz band •4×4 MIMO with four spatial streams for 2.4-GHz band •Downlink OFDMA •TWT •MRC •802.11ax beamforming •20-, 40-, 80, and 160-MHz channels •PHY data rates up to 5 Gbps at 5 GHz •Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) •CSD support
Integrated antenna	• 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth •5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth
Interfaces	•1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz •Management console port (RJ-45) •USB 2.0 with up to 3.75W (enabled via future software)
Indicators	• SStatus LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	• Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm) •Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)
Input power requirements	•802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®) •Cisco power injector, AIR-PWRINJ6= •802.3af PoE •Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 2.5 Gbps; in addition, the USB port will be off.
Environmental	•Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) •Nonoperating (storage) altitude test: 25˚C, 15,000 ft. •Operating temperature: 32° to 122°F (0° to 50°C) •Operating humidity: 10% to 90% (noncondensing) •Operating altitude test: 40˚C, 9843 ft.
System memory	•2048 MB DRAM •1024 MB flash
Available transmit power settings	2.4 GHz •23 dBm (200 mW) •20 dBm (100 mW) •17 dBm (50 mW) •14 dBm (25 mW) •11 dBm (12.5 mW) •8 dBm (6.25 mW) •5 dBm (3.13 mW) •2 dBm (1.56 mW) • -1 dBm (0.78 mW) • -4 dBm (0.4 mW) • -6 dBm (0.25 mW) 5 GHz •26 dBm (400 mW) •23 dBm (200 mW) •20 dBm (100 mW) •17 dBm (50 mW) •14 dBm (25 mW) •11 dBm (12.5 mW) •8 dBm (6.25 mW) •5 dBm (3.13 mW) •2 dBm (1.56 mW) •-1 dBm (0.78 mW) •-4 dBm (0.4 mW)
Frequency band and 20-MHz operating channels	I (I regulatory domain): • 2.412 to 2.472 GHz; 13 channels •5.180 to 5.320 GHz; 8 channels